Background
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential.
Designers in the computer industry seek not only to 'build the better mousetrap' but to build the best mouse. The computer mouse is an accessory to the personal computer that has become an essential part of operation of the computer. The small device fits neatly in the curve of the user's hand and enables the user, through very limited movements of the hand and fingers to 'point and click' instructions to the computer. A rolling ball on the underside of the mouse gives directions on where to move to the cursor (pointer) on the monitor or screen, and one to three buttons (depending on design) allow the user to say yes by clicking the buttons on the right instruction for the computer's next operation.
History
- Model: E928- Color: Black- Material: Plastic- 2.4GHz wireless technology- Operating Range: 10 meters- Resolution: 1000/1600 DPI- With page up/down function.
- Optical Mouse Fcc Standard. 2.4ghz Wireless Optical Mouse Tested To Comply With Fcc Standards Ce For Home Or. Optical Mini Wireless Mouse Driver Mini. Technical data is gathered for the products supported by this tool and is used to identify products, provide relevant solutions and automatically update this tool, to improve our products.
Dr. Douglas Engelbart, a professor with the Stanford Research Institute in Menlo Park, California, developed the first device that came to be known as the mouse in 1964. At that time, the arrow keys on the keyboard were the only way of moving the cursor around on a computer screen, and the keys were inefficient and awkward. Dr. Engelbart made a small, brick-like mechanism with one button on top and two wheels on the underside. The two wheels detected horizontal and vertical movement, and the unit was somewhat difficult to maneuver. The unit was linked to the computer by a cable so the motion signals could be electrically transmitted to the computer for viewing on the monitor. One of Dr. Engelbart's co-workers thought the device with its long cable tail looked something like a mouse, and the name stuck.
Other scientists, notably those at the National Aeronautics and Space Administration (NASA), had also been seeking methods of moving cursors and pointing to objects on the computer screen. They tried steering wheels, knee switches, and light pens, but, in tests of these devices versus Engelbart's mouse, it was the mouse that roared. NASA's engineers were concerned, however, about the spacewalks the mouse would take from its work surface in the weightlessness of space.
By 1973, the wheels on the mouse's undercarriage had been replaced by a single, free-rolling ball; and two more buttons (for a total of three) had been added to the top. The creature was called both a mouse and a pointing device, and Xerox combined it with its Alto computer, one of the first personal computers. The Alto had a graphical user interface (GUI); that is, the user pointed to icons, or picture symbols, and lists of operations called menus and clicked on them to cause the computer to open a file, print, and perform other functions. This method of operating the computer was later adapted by Macintosh and Windows operating systems.
The development of the personal computer stimulated an explosion of applications for the device that was small enough to be used at a number of work stations. Engineers could develop computer-aided designs at their own desks, and the mouse was perfect for drawing and drafting. The mouse also began to generate offspring, collectively called input/output devices, such as the trackball, which is essentially a mouse lying on its back so the user can roll the ball instead of moving the entire unit over a surface. The military, air traffic controllers, and video game players now had a pet of their own. Mechanical sensors in both types of devices were replaced by optical-electronic sensor systems patented by Mouse Systems; these were more efficient and lower in cost. An optical mouse with no moving parts was developed for use on a special mouse pad with grid lines; light from inside the mouse illuminates the grid, a photodetector counts the number and orientation of the grid lines crossed, and the directional data are translated into cursor movements on screen.
The mouse began to multiply rapidly. Apple Computers introduced the Macintosh in 1984, and its operating system used a mouse. Other operating systems like Commodore's Amiga, Microsoft Windows, Visicorp's Vision, and many more incorporated graphical user interfaces and mice. Improvements were added to make sensors less prone to collecting dust, to make scrolling easier through an added wheel on the top, and to make the mouse cordless by using radio-frequency signals (borrowed from garage door openers) or infrared signals (adapted from television or remote controls).
Mouse Anatomy
Body
The mouse's 'skin' is the outer, hard plastic body that the user guides across a flat surface. It's 'tail' is the electrical cable leading out of one end of the mouse and finishing at the connection with the Central Processing Unit (CPU). At the tail end, one to three buttons are the external contacts to small electrical switches. The press of a button closes the switch with a click; electrically, the circuit is closed, and the computer has received a command.
On the underside of the mouse, a plastic hatch fits over a rubberized ball, exposing part of the ball. Inside, the ball is held in place by a support wheel and two shafts. As the ball rolls on a surface, one shaft turns with horizontal motion and the second responds to vertical motion. At one end of each of the two shafts, a spoked wheel also turns. As these spokes rotate, infrared light signals from a light-emitting diode (LED) flicker through the spokes and are intercepted by a light detector. The dark and light are translated by phototransistors into electrical pulses that go to the interface integrated circuit (IC) in the mouse. The pulses tell the IC that the ball has tracked left-right and up-down, and the IC instructs the cursor to move accordingly on the screen.
The interface integrated circuit is mounted on the printed circuit board (PCB) that is the skeleton to which all the internal workings of the mouse are attached. The integrated circuit, or computer chip, collects the information from the switches and the signals from the phototransistors and sends a data stream to the computer.
Brain
Each mouse design also has its own software called a driver. The driver is an external brain that enables the computer to understand the mouse's signals. The driver tells the computer how to interpret the mouse's IC data stream including speed, direction, and clicked commands. Some mouse drivers allow the user to assign specific actions to the buttons and to adjust the mouse's resolution (the relative distances the mouse and the cursor travel). Mice that are purchased as part of computer packages have the drivers built in or preprogrammed in the computers.
Raw Materials
The mouse's outer shell and most of its internal mechanical parts, including the shafts and spoked wheels, are made of acrylonitrile butadiene styrene (ABS) plastic that is injection-molded. The ball is metal that is coated in rubber; it is made by a specialty supplier. The electrical micro-switches (made of plastic and metal) are also off-the-shelf items supplied by subcontractors although mouse designers can specify force requirements for the switches to make them easier or firmer to click. Integrated circuits or chips can be standard items, although each manufacturer may have proprietary chips made for use in its complete line of products. Electrical cables and overmolds (end connectors) are also supplied by outside sources.
The printed circuit board (PCB) on which the electrical and mechanical components are mounted is custom-made to suit the mouse design. It is a flat, resin-coated sheet. Electrical resistors, capacitors, oscillators, integrated circuits (ICs), and other components are made of various types of metal, plastic, and silicon.
Design
Design of a new mouse begins with meetings among a product development manager, designer, marketing representative, and consulting ergonomist (a specialist in human motion and the effects various movements have on body parts). A list of human factors guidelines is developed specifying size range of hands, touch sensitivity, amount of work, support of the hand in a neutral position, the user's posture while operating the mouse, finger extension required to reach the buttons, use by both left- and right-handed individuals, no prolonged static electricity, and other comfort and safety requirements; these can differ widely, depending on whether the mouse is to be used in offices or with home computers, for example. A design brief for the proposed mouse is written to describe the purpose of the product and what it achieves; a look is also proposed in keeping with the anticipated market.
The design team returns to the table with foam models; scores of different shapes may be made for a single mouse design. User testing is done on these models; the engineers may do this preliminary testing themselves, or they may employ focus groups as typical users or observe one-on-one testing with sample users. When the selection of models is narrowed down, wooden models that are more refined and are painted are made of the winning designs. Input is gathered again on the feel, shape, and look of the models; the ergonomist also reviews the likely designs and confirms that the human factors guidelines have been achieved.
When the optimal model is chosen, the engineering team begins to design the internal components. A three-dimensional rendering is computer-generated, and the same data are used to machine-cut the shapes of the exterior shell with all its details. The mechanical and electronics engineers fit the printed circuit board (and its electronics) and the encoder mechanism (the ball, shafts, wheels and LED source and detector) inside the structure. The process of fitting the workings to the shell is iterative; changes are made, and the design-and-fit process is repeated until the mouse meets its design objectives and the design team is pleased with the results. Custom chips are designed, produced on a trial basis, and tested; custom electronics will help the design meet performance objectives and give it unique, competitive, and marketable characteristics.
The completed design diagrams are turned over to the project tooler who begins the process of modifying machines to produce the mouse. Tooling diagrams are generated for injection-molding the shell, for example. The size, shape, volume of the cavity, the number of gates through which the plastic will be injected into the mold, and the flow of the plastic through the mold are all diagramed and studied. After the final tooling plan is reviewed, tools are cut using the computer-generated data. Sample plastic shells are made as 'try shots' to examine actual flow lines and confirm that voids aren't induced. Changes are made until the process is perfect. Texture is added to the external appearance of the shell by acid etching or by sand blasting.
In the meantime, the engineering team has set up the assembly line for the new mouse design and conducted trial assemblies. When the design details are finalized, tools have been produced, and test results have met the design team's objectives and standards, the mouse is ready for mass production.
The Manufacturing
Process
To make the computer mouse, several manufacturing processes are performed simultaneously to make different pieces of the unit. These processes are described in the first three steps below. The pieces are then brought together for final assembly, as described in steps 4 through 7.
- In one of the sets of manufacturing and assembling steps, the printed circuit board (PCB) is cut and prepared. It is a flat, resin-coated sheet that can be of surface-mount design or through-hole design. The surface-mount version is assembled almost entirely by machine. A computer-controlled automatic sequencer places the electrical components in the proper order onto the board in a prescribed pattern.
For through-hole PCB assembly, attachment wires of the electronic components are inserted in holes in the PCB. Each assembly line worker has a drawing for part of the board and specific units to add. After all the components are mounted on the board, the bottom surface of the board is passed through molten lead solder in a wave soldering machine. This machine washes the board with flux to remove contaminants, then heats the board and the components it carries by infrared heat to lessen the possibility of thermal shock. As the underside of the board flows over the completely smooth, thin liquid sheet of molten solder, the solder moves up each wire by capillary action, seals the perforations, and fixes the components in place. The soldered boards are cooled. The PCB is visually inspected at this stage, and imperfect boards are rejected before the encoder mechanism is attached.
- The encoder mechanism (including the rubber-covered ball, the support wheel, both spoked wheels and their axles, the LED, and its detector) is assembled as a separate unit. The plastic parts were also manufactured by injection-molding in accordance with proprietary specifications and trimmed of scrap plastic. After the mechanism is assembled, the unit is fastened to the PCB using either clips or screws. The board is now completely assembled and is subjected to an electronics quality control test.
- The mouse's tail—its electrical cable—has also been manufactured using a set of wires, shielding, and the rubber cover. The cable has two additional pieces of molded rubber called overmolds. These are strain relief devices that prevent the cable from detaching from the mouse or its connector plug if the cable is tugged. Mouse makers typically design their own shapes for overmolds. The near-mouse overmold is hooked to the housing, and, at the opposite end of the tail, the connector is soldered to the wires and the connector overmold is popped into place.
- The pieces of the outer shell are visually inspected after molding, trimming, and surface (finish) treatment and prior to assembly. The outer shell is assembled in four steps. The completed PCB and encoder assembly is inserted into the bottom of the shell. The buttons are snapped into the top part of the housing, the cable is attached, and the top and bottom are screwed together using automated screwdrivers.
- The final electronics and performance quality check is performed when assembly is essentially complete. Rubber or neoprene feet with adhesive sheeting pre-applied to one side are added to the underside of the mouse.
- While the tooling designs and physical assembly described above have been in progress, a programming team has been developing, testing, and reproducing the mouse driver firmware. The firmware so-called because it lies in the realm between software and hardware consists of a combination of codes in the integrated circuit and the translation of the mouse's directional movements and micro-switch signals that the receiving computer needs to understand when the mouse is attached. When the driver has been developed, the manufacturer's own testers run it through rigorous trials, and both the Federal Communications Commission (FCC) and the European Commission (CE—an organization that governs radio emissions and electrostatic discharge) also approve the electronics. Approved driver data is encoded and mass-produced on diskettes.
- The FCC requires that signaling or communications devices including the mouse bear labels identifying the company and certain product specifications. The labels are preprinted on durable paper with strong adhesive so they cannot easily be removed. A label is pasted on the mouse bottom, and the mouse is bagged in plastic. The device, its driver diskette, and an instruction booklet with registration and warrantee information are boxed and prepared for shipment and sale.
Quality Control
Use of computer-generated designs builds quality and time savings into the product. Data can be stored and modified quickly, so experiments with shapes, component layouts, and overall look can be attempted and iterative adjustments can be made. Computer-aided design data also speeds review of
At least three quality control steps are performed during assembly. An electronics check is carried out on the PCB after its components are attached (and soldered into place if through-hole assembly methods are used) and before any of the plastic mechanism is attached. The plastic parts (the encoder mechanism and the outer shell) are visually inspected when they are complete but before they are connected to the board and electronics; this prevents disassembly or wasting electronics due to a defective shell, for example. Finally, the completely assembled device is subjected to another electronics and performance check; 100% of the mice manufactured by Kensington Technology Group are plugged into operating computers and tested before they are packaged. As noted above, both the FCC and CE regulate aspects of mouse operations, so they also test and approve driver data.
Byproducts/Waste
Computer mice makers do not generate byproducts from mouse manufacture, but most offer a range of similar devices for different applications. Compatible or interchangeable parts are incorporated in new designs or multiple designs whenever possible to avoid design, tooling, and assembly modification costs.
2.4 Ghz Wireless Optical Mouse Tested To Comply With Fcc Standards Driver
Waste is minimal. The mouse's ABS plastic skin is highly recyclable and can be ground, molded, and reground many times. Other plastic and metal scrap is produced in minute quantities and can be recycled or disposed.
The Future
Devices that are modifications of mice are currently on the market. The Internet mouse inserts a scrolling wheel between the two buttons to make scrolling of web pages easier; a still more sophisticated version adds buttons that can be programmed by the user to perform Internet functions, like moving back or forward, returning to the home page, or starting a new search. One mouse version has returned to the floor where two foot pads or pedals replace the ball and buttons; one pedal is pushed to relocate the cursor and the second clicks. Cordless mice that communicate with radio signals are available, and the mouse has been disposed of altogether by the touchpad. The user runs a finger across the touchpad to reposition the cursor, and web pages can be scrolled and advanced by other, specific moves. Many of these adaptations are designed to eliminate repetitive stress ailments and save forearm strain.
The mouse's inventor, Dr. Engelbart, never believed the mouse would reach thirty-something or retain its nontechnical name. In fact, both the mouse and its trackball offspring are increasingly popular as shapes become more comfortable, less cleaning and maintenance are required, and reliability and longevity improve. Future developments in mice will follow the evolution of the Internet and include more options for programmability, such as switching hands to double the number of available functions. The mouse may become extinct someday, and the most likely candidate to replace it is a device that tracks the eye movement of the computer user and follows it with appropriate cursor motions and function signals.
Where to Learn More
Books
Ed., Time-Life Books. Input/Output: Understanding Computers. Alexandria, VA: Time-Life Books, 1990.
Periodicals
Alexander, Howard. 'Behold the Lowly Mouse: Clever Technology Close at Hand.' New York Times (October 1, 1998): D9.
'The Mouse.' Newsweek (Winter 1997): 30.
Randall, Neil. PC Magazine (January 5, 1997): 217.
Terrell, Kenneth. 'A new clique of mice: designers turn the computer mouse on its head; some cut its tail.' U.S. News & World Report (March 23, 1998): 60+.
Other
Kensington Technology Group. http://www.kensington.com/ (June 7, 1999).
Logitech. http://www.logitech.com/ (June 7, 1999).
Microsoft Corporation. http://www.microsoft.com/ (June 7, 1999).
Description
This item is from the PC Hardware FAQ, by Willie Lim and Ralph Valentino with numerous contributions by others. (v1.25).
[From: scharf@mirage.nsc.com (Steve Scharf)]
FCC Part 15 EMI Certification and UL/CSA/TUV Safety Certification
FCC Part 15 Certification of Computer Equipment
The basic thing to understand is that SYSTEMS are certified, Not individual circuit boards (though in most cases add-on cards ARE certified), not motherboards, not cases, and not power supplies.
Class A & B
Class A is for systems that will be used only in a commercial environment.
Class A is more lax than Class B.
Class B is stricter, and is for systems that will be used in a home.
A manufacturer cannot simply declare that a system is not intended for home use and test to the more lax Class A limits (believe me, they tried this). A high end file server with a RAID array of drives and multiple network connections would qualify for Class A. A simple Pentium 100 desktop or Power PC would not.
FCC Certified Peripherals and Add-On Cards
Most add-on cards and peripherals (disk drives, floppy drives, CD-ROM drives, tape drives, etc.) have their own FCC certification. This is so they can be sold separately. They would technically not need to be certified separately if the system in which they are installed is certified as a unit.
Once a SYSTEM has passed FCC certification, a manufacturer may swap or add FCC certified cards and peripherals and retain compliance even though the system may technically exceed the limit with the different peripherals. I believe the FCC still has the right to demand that the system be in actual compliance with the emissions limits.
Motherboards
The FCC has twice considered requiring motherboards be FCC certified and has twice rejected the idea. Of course there is great appeal to system manufacturers of this concept. Once a system is certified, the manufacturer could swap everything except the case and power supply and not have to re-test.
The problem with this concept is that there could be no guarantee that the case that the motherboard was ultimately installed in, would be as good as the one that it was originally certified in. It would be easy to manufacture a very EMI tight case at great expense, inside which nearly any motherboard could pass. I don't believe ANY 386 or greater class of motherboard could pass outside of a case.
The Independent Testing Labs were very vocal against the certification of motherboards since it would have seriously affected their business.
Power Supplies and Cases
Power supplies and cases are NOT FCC certified.
Keyboards and Mice
These are not required to be certified seperately if they are sold as part of a system, but in most cases they are certified separately so they can be sold separately.
Monitors, Printers, Externally Powered Peripherals
Each has their own certification. It actually has gotten very difficult to manufacture monitors that can meet Class B. This is why so many monitors have the plastic enclosed ferrite bead on the interface cable.
Swapping Motherboards, Power Supplies, and Cases.
You may not swap motherboards, power supplies, or cases, without re-certification.
Bare Bones Systems
Some motherboard manufacturers sell 'bare bones' systems. This is the motherboard, power supply, and case, that has been FCC certified with some add-on cards and peripherals. The reseller can add any certified add-on cards and peripherals and retain compliance. For each new motherboard they recertify the bare bones system.
The bare bones system concept has not been very successful in the chop shop type stores. This is because the bare bones systems cannot use the lowest quality and cheapest case and power supply, and thus costs several dollars more than what a chop shop normally uses. The bare bones systems are also sometimes UL and CSA certified which necessitates better quality (and thus more costly) power supplies and cases.
How Add-On Card Makers Certify Their Cards.
What all add-on card makers do, is to certify their cards in a 'golden' system; a system with an excellent low noise (often low speed) motherboard and a high quality well shielded case and power supply. It isn't their problem to certify cards in a crappy and noisy system. The original IBM AT running at 6 Mhz is a popular system for certifying add-on cards, though of course this doesn't work anymore with PCI or VL bus cards.
How System Vendors Certify Their Systems.
What most system makers do is to certify their systems with the lowest noise add-on cards and peripherals they can find. Then they can swap in any FCC certified add-on cards and peripherals.
Thus the system you buy may legally be FCC certified even though it is over the emission limits. I think the FCC has built in leeway into the requirements to allow for this. I think that the FCC still has the right to insist that such a system meet the actual limits, but I doubt if they ever do anything about it.
How All The Small Stores Comply with FCC Part 15
Most small chop shop stores simply do not certify their systems. They are violating federal law and they usually get away with it since the FCC has very limited resources to enforce their rules.
The problem is actually solving itself as buyers become more educated. The systems assembled by the small stores are usually lower quality, often higher priced, and lack the warranty support of the systems sold by the top and middle tier vendors.
What About Build-It-Yourself
There is no certification requirement for do-it-yourself systems. However if their is a complaint lodged against you and the FCC investigates and finds you to be the cause of excessive emissions, then they can take action against you.
UL/ETL/CSA/TUV Safety Certification
UL-Underwriters Laboratories
CSA-Canadian Standards Association
TUV-German Safety Agency.
ETL-Electronic Testing Laboratories
These are product safety agencies. Most top tier systems are UL (or ETL)/CSA/TUV approved. Each agency now is supposed to inspect to the same international standards, but some policies are different in each agency.
The approval process is pretty simple despite all the requirements, but it can be costly so the cost needs to be amortized over a lot of systems.
This is a partial list of the requirements:
No high voltages can be accessible to the user, so the power switch may have no exposed contacts (this is a problem on some cheap cases). This is why the original PCs had a power supply with an integral switch on the side, and why the PS/2 had a front switch that was mechanically linked to the switch on the power supply by a long steel rod
The power supply must be UL/CSA/TUV approved (low quality power supplies cannot pass this approval so this is a good indication of at least minimal quality of a power supply).
All peripherals powered by the system must have fuses in the power lines. This means PS/2 mice and all keyboards. They don't want a short in the keyboard or mouse setting the cable on fire (this is ridiculous, since the power supply would shut down if the +5volts was shorted to ground, but it is still a requirement).
The lithium battery must be double protected against being charged by the system. Two diodes are typically used for this.
All circuit board materials must meet flame ratings.
Proper labeling of power connections, fuses, and switches is required.
There are limitations on the colors of switches and lamps, i.e. no red LEDs (which indicate danger).
All peripherals must be approved separately.
A 'finger' test to be sure that fingers cannot touch moving parts like fans is performed.
The agency will test the system FULLY LOADED with peripherals and load boards to simulate maximum power supply load. Afterwards, depending on the agency, you can swap approved peripherals. UL requires that you submit a list of which approved peripherals you will swap and investigates every one to be sure that current limits are not exceeded. CSA and TUV do not require this. UL is a royal pain, since there are so many different peripherals, and so many new ones are being introduced.
All plastics must be approved. The agency will attempt to set the unit on fire.
Towers are subject to a 'tip test,' which necessitates the use of bases on the case. Tower PC's are especially poorly designed for the tip test since all the heaviest components are at the top.
You must perform certain test procedures on each system to check shock hazards. This is called Hi-Pot testing. The test machines must be calibrated periodically.
You must affix proper labels, and there are very strict requirements on the materials, the ink, the logos, etc.
The agency will inspect your factory and then conduct periodic and/or random inspections to ensure that you are complying with all the rules.
Do You need these Safety Approvals?
In the United States there is no federal requirement that electrical equipment be approved. Some counties and cities DO have this requirement. Most recognize UL, ETL, or CSA, and some may recognize others as well.
Some bare bones systems have UL/CSA approval, but since UL must approve a system's peripherals as they change, it is uncommon. Some manufacturers are getting just CSA since it is valid in most places in the U.S. that require certification.
Companies that export systems to Canada and Europe must have the appropriate approvals.
As you would expect, very very few, if any, chop shops can get these safety approvals. In reality, the systems they build would be pretty close to passing, providing they use the proper power supplies and switches, since nearly all motherboards and peripherals meet the proper requirements.
The safety approvals do usually ensure a modicum of quality, since no fly-by-night factory could hope to meet the safety standards. Still there are instances of really poor equipment passing all the appropriate safety approvals.
As an aside, in Germany many types of products are subject to TUV testing, not just electronics. TUV designs appropriate tests for the product category. The bicycle/ski rack on the roof of my car is a TUV approved Thule rack, which has mounting systems far superior to their non-approved competitor. You can be fairly sure that it won't fly off the car at high speeds.
VDE Emissions Testing
Germany has different emissions requirements (which are accepted bymost European countries). VDE emissions approval is difficult toobtain becaues there are only a couple of labs in the United Statesthat VDE has allowed to certify systems. Thus, few PC's that are notintended for sale in Europe will have VDE approval.
Continue to:
- prev: 8.15 I've run out of power connectors, what can I do?
- next: 9.02 What do the industry acronyms stand for?